Wall plate
A wall plate is a load-bearing structural member used horizontally and part of a timber framework.
In the UK, the term typically refers to a length of timber bedded on mortar on top of the internal leaf of an external cavity wall. This provides a fixing point for the feet of rafters, and distributes the load exerted by the roof structure down through the walls without creating pressure points where each rafter meets the wall, and also acts to prevent wind uplift.
Generally, wall plates are in lengths of not less than 3 m. As the mortar does not bond the wall plate to the wall, steel straps are used to ensure that the roof structure remains secure. These are typically 1.2 m long with a cranked end and are fixed to the wall plate at 2 m centres. If the strap is not turned into a bed joint, it should be fixed to the wall with at least four screw fixings.
[edit] Related articles on Designing Buildings Wiki
- Domestic roofs.
- Cavity wall.
- Firring.
- Flashing.
- Flat roof.
- Roofing defects.
- Roof insulation.
- Sheathing.
- Timber.
[edit] External references
Featured articles and news
Licensing construction; looking back to look forward
Voluntary to required contractors (licensing) schemes.
A contractor discusses the Building Safety Act
A brief to the point look at changes that have occurred.
CIOB Construction Manager of the Year award
Shortlist set to go head-to-head for prestigious industry title.
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.